Wieland

Sort By:  
WN1 Shiny Nickel Plating (BAN073)

Ready-to-use bright nickel bath 1000 ml for optimal leveling and bright nickel deposits.

Features:

  • Temperature: 40 - 55 ° C
  • Exposure time: 2 - 15 minutes
  • Voltage: 1.8 - 4.0 V
  • Deposition: 1.04g / Ah
  • pH value: 3.2 - 3.8; adjust with sulfuric acid if necessary
  • Movement: electrolyte or goods movement required

Anodes:

Pure nickel pipe material: glass, ceramic, plastic (PE, PVC, etc.)

Note: The product must not be mixed with cyanides.

28.45€
Bath Protection Pen (BAN044)
Apply a protective film (red color) on the piece that we want to bathe, after its application and its quick drying for 3 to 5 minutes.

The protected parts will be free from deposition of the applied bath.

Use in electrolytic (acidic) baths and silver patina.
22.00€
Wieland Brilliant Rhodium (BAN057)
Bath of 100 ml of brilliant rhodium “Blancadur TI” with 2 g of rhodium.

Adding 900 ml of deionized (distilled) water creates a 1 liter ready-to-use bath.

Features:
  • Rhodium content: 2.0 g / l
  • Temperature: 20 - 35°C (ideally 25 - 30°C)
  • Exposure time: 2 minutes (1 - 10 minutes)
  • Voltage: 2.3 volts (2.1-2.5 volts)
  • Current density: 0.75 A / dm² (0.5-1.0 A / dm²)
  • Deposition: 6 mg / amine
  • pH value: > 1
  • Movement: movement of electrolyte or goods
  • Anodes: titanium, platinum-plated
  • Bowl material: Glass, acid resistant. Plastic (PP, PVC, etc.)
  • Precipitation data: density 11.2 g / cm²
  • Hardness: approx. 800 HV
  • Layer thickness: up to 1.0 µm
2,550.00€
Shiny Silver Bath 500 ml (BAN075)
WILAPLAT bright silver plating is to be used in a conventional electroplating system.
Prior to galvanic treatment, the surfaces to be coated must be clean and free from grease.
In order to avoid a current-free and therefore non-sticky silver coating, the rectifier must be switched on when the goods are submerged.

Silver content: 30.0 g/l
Cyanide content: 120.0 g/l
Temperature: 20 - 30 ° C
Exposure time: 5 - 50 minutes
Voltage: 0.5 - 1.2 volts
Current density: 1.0 - 1.5 A / dm²
Deposition: 66.7 mg / amine
Movement: required
Anodes: fine silver
Bowl material: glass, alkali resistant. Plastic (PP, PVC, etc.)
Precipitation data: Density 10.3 g / cm³
Hardness: approx 110 HV

The product contains cyanides and is classified as very toxic.

Not to be associated with acids or acidic solutions
44.25€
Per Page      1 - 4 of 4
  • 1